E22 24V 50A Charger

Recommend: 29.4v 50a for 24v 500ah lead acid battery,25.55v 50a for 7s 250ah LiFePO4 battery,29.2v 50a for 8s LiFePO4 battery,29.4v 50a for 7s 150ah li-ion battery,etc.

Model : E22-24V50A
Max Power : 2200W
Shell : Aluminium Casting
Protection Level : IP66
Input : 85-265Vac/40-70Hz
Power Factor : 0.98
Max Efficiency : ≥93%
Noise : ≤40dB
Operating temperature : -20°C~65°C
Storage temperature : -40°C~85°C

Ⅰ,Brief Introduction:

This charger adopts MCU and PWM,able to set the optimal charging curve according to battery information.With active PFC and LLC half-bridge circuit ,the charger is high-efficiency, more stable and more safer.Fully sealed aluminum die-cast enclosure and internal padding,to be waterproof,dustproof and shockproof.Three-color LED indicator can be programmed for different charging states.The fan can adjust speed automatically.


Ⅱ,Common Output:

Nominal Voltage

Lead Acid

LiFePO4Li-ion

Charging Current

@110Vac

Charging Current

@220Vac

12V

14.7V

14.6V

16.8V

50A

50A

24V

29.4V

29.2V

29.4V

40A

50A

36V

44.1V

43.8V

42V

30A

45A

48V

58.8V

58.4V

58.8V

22A

35A

60V

73.5V

73V

67.2V

18A

30A

72V

88.2V

87.6V

84V

15A

25A

84V

102.9V

102.2V

100.8V

12A

20A

96V

117.6V

116.8V

117.6V

11A

18A

Protections:

1. Input undervoltage/overvoltage protection

2. Overheating protection

3. Output no-load protection

4. Output short circuit/reverse connection protection

5. Output overcurrent/overvoltage protection

Remark:We are manufacturer!We can customize the charging profile according to your battery and your requests.


Ⅲ,Optional Functions:

□ CAN/RS485                                                                                             □ 12V Power Supply

□ Interlock                                                                                                   □ Enable Loop

□ External Indicator                                                                                     □ Temp Sensor

□ Reprogramming                                                                                       □ Analog                    

□ Shut Down/Restart                                                                                   □ Others


Ⅳ,Case Size:

E22车载.jpg


Ⅴ,Color options:

1,Silver

2,Black

3,Blue

4,Green

5,Red

6,Gold

You also can customize the color.



Ⅵ,Hardware options:

1,With handle.

2,Cover plate of charger is with mounting holes to be on-board.

3,Extra cover plate upon Fan.

Others that you would like to add on charger.


Ⅶ,AC Cable and Plugs:

Built-in AC cable or Independent AC cable.

Length of AC cable: 0.5m/1m/1.2m/1.5m/2.8m.....

Wire Gauge:3*1mm²/3*1.31mm²/3*1.5mm².....

AC plugs:National standards (US EU AU UK....), Bare wire end, industrial plugs....


Ⅷ,DC Cable and Connectors:

Color of DC cable:Black, Green, Yellow...

Length of AC cable: 0.5m/1m/1.2m/1.5m/2.8m.....

Wire Gauge:2*2.5mm² / 2*3.5mm²/2*4mm².... (more wires if you choose some functions)

DC connectorss:Bare wire end, XT30/60/90, Andeson, REMA,Ring terminals,alligator clip.... 


If you would like to check more details,please contact us by email: jerry@yileide.com


ABOUT US

Warranty

CONTACT US

Mobile: +86-18319066207
Tel: +86-0755-33155325
Email: jerry@yileide.com
Address: Chuangxin Industials,Xintian Community,Guanhu street,Longhua district,Shenzhen,Guangdong,China,518110